Arlon’s 85HP Receives Official IPC Validation to IPC-4101E-WAM1/43
May 24, 2021 | Arlon Electronic MaterialsEstimated reading time: 1 minute
Arlon Electronic Materials is pleased to announce that IPC Validation Services officially recognizes Arlon’s 85HP laminate as having passed all tests that meets or exceeds the product performance requirements of IPC-4101E-WAM1/43. By achieving validation to slash sheet 43, Arlon’s 85HP is distinguished as the most thermally stable, pure polyimide resin system on the market. Specifically, 85HP meets the test criteria for less than 1% coefficient of thermal expansion in the Z axis between 50o to 260o C. In “Time to Delamination” tests at 300o C, 85HP withstood thermal exposure for longer than 60 minutes, far exceeding the slash 43 requirement of 5 minutes. Furthermore, 85HP moisture absorption of 0.19% is well below the slash 43 criteria of 0.5% maximum. CTE (x-y plane) of the 85HP is 17 ppm matching the CTE of copper. In addition to these slash 43 requirements, 85HP has a thermal conductivity of 0.50 W/mK, which is two times (2X) greater than other pure polyimide CCL materials.
These unique attributes are why 85HP is the first polyimide product to be validated to three IPC-4101 slash sheets 40, 41 and 43.
Test results for 85HP’s Validation can be found on the IPC Validation Services website.
Applications for Arlon’s 85HP include high layer count MLB’s incorporating multiple sequential lamination operations, thick copper MLB’s, high power copper internal planes, deep space electronics, down-hole oil and gas drill equipment, engine control modules, rocket motor controls, and avionic electronics.
For additional information, please visit our website at www.arlonemd.com.
Related Article:
Suggested Items
AT&S Brings High-Tech to the Museumsquartier
05/06/2024 | AT&SAT&S, as a “MQ goes Green” partner, has prepared special highlights for the occasion: Visitors aged eight and above can embark on an interactive journey through the fascinating world of microelectronics.
Coming to Terms With AI: SMT007 Magazine's May 2024 Topic
05/06/2024 | I-Connect007 Editorial TeamIn the May 2024 issue of SMT007 Magazine, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
IMI Welcomes New CEO
05/03/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI),The IMI Board of Directors announced, in a disclosure dated April 25, 2024, the appointment of Louis Sylvester Hughes, Chief Executive Officer (CEO).
Electronics Industry Sentiment Rose in April, Hitting New High
05/02/2024 | IPCApril 2024 marked the third consecutive month of sentiment growth among electronics manufacturers. When asked if they expected labor costs for hourly workers to rise over the next month, manufacturers in the United States, Mexico, and Europe predicted a five percent increase, while manufacturers in Asia predicted a slightly lower four percent increase.